Linear Tracks: Industrial Linear Motion Systems Explained
Open almost any production machine and the first axis you see is linear. A plasma head traversing a...
linear-tracks material-handling
Drupe Engineering has built industrial automation at MIDC Taloja since 1992. Specifically, we manufacture CNC cutting machines, robotic welding gantries, 7th-axis linear tracks and pick-and-place gantry systems for heavy industries. As a result, our machines run on the production floors of L&T, Godrej, JCB and CNH, with installations across 16 countries.
Plasma, oxy-fuel, bevel and pipe cutting, cut clean to weld-prep spec across 0.5 to 300 mm.
Robotic gantries, column-and-boom systems, nozzle welders and seam welders built around your part, weld code and cycle time.
H-frame pick-and-place gantries that move parts, tools or welders across the cell with repeatable precision.
Long-stroke rails and 7th-axis tracks with sub-millimetre repeatability for robotic welding and cutting.
Linear motion slides with ±0.02 mm repeatability, extending robot reach across the cell.
Support units, locknuts and pinions, the precision building blocks inside every Drupe machine.
From a single conviction in 1992 that India could build heavy automation to imported tolerances, Drupe Engineering grew into a 300-ton facility at MIDC Taloja. Today, our CNC cutting machines, robotic welding gantries and linear tracks run on the production floors of L&T, Godrej, JCB and CNH. In addition, our systems are installed across 16 countries, delivered by one in-house team from drawing to commissioning.
Gantry and column-and-boom systems with high-deposition welding for thick plate and large sections, holding tolerance under heavy load.
Profile, bevel and pipe cutting plus welding automation for pressure-grade pipe, plate and vessel components, from 0.5 to 300 mm thickness.
Circumferential and longitudinal seam welding, nozzle welding and bevel prep for tanks, boilers and vessels where every seam is tested.
Welding gantries and special purpose machines for coach shells, bogie frames, shaft lines and wagon assembly at production volume.
Long linear tracks and robotic gantry welding for hull blocks, panels and stiffeners, sized to weld the block where it sits at ten-ton scale.
Gantries, Robotic welding-zone SPMs and handling cells for high-volume, repeat-cycle chassis, sub-assembly and component lines.
Gantry and column-and-boom systems with high-deposition welding for thick plate and large sections, holding tolerance under heavy load.
Profile, bevel and pipe cutting plus welding automation for pressure-grade pipe, plate and vessel components, from 0.5 to 300 mm thickness.
Circumferential and longitudinal seam welding, nozzle welding and bevel prep for tanks, boilers and vessels where every seam is tested.
Welding gantries and special purpose machines for coach shells, bogie frames, shaft lines and wagon assembly at production volume.
Long linear tracks and robotic gantry welding for hull blocks, panels and stiffeners, sized to weld the block where it sits at ten-ton scale.
Gantries, Robotic welding-zone SPMs and handling cells for high-volume, repeat-cycle chassis, sub-assembly and component lines.
Every Drupe project starts with your part and your problem, gets engineered to your floor and cycle time, then commissioned on site and supported for the life of the machine. Tell us what you need to build.
Open almost any production machine and the first axis you see is linear. A plasma head traversing a...
linear-tracks material-handling
Whether it is a new machine, a line expansion, standard components or a service query, send us the details and we will come back within 24 working hours.